(+353) 21 4709708

General Surface Preparation

Floor Preparation Services

Floor Regeneration / Correction

Cleaning / Jetting

Shot Blasting



Scabbling / Scarifying / Milling

Diamond Grinding

Open Blasting

Soda Blasting

We can offer our customers a pressure washing service of up to 5000 psi, hot or cold. It's ideal for the removal of all grease and dirt from stone before the application of stone sealers. The treatment is commonly used to eliminate traffic dirt, the buildup of grime, or on weathered buildings, prior to restoration work.

Typical Applications:
Shot Blasting is recognised throughout the flooring industry as a standard preparation technique for concrete, stone, asphalt and steel surfaces. Equipped with a range of blast machines of varying size we have a blaster to suit almost all floor spaces. If you need to turnaround your project quickly then we can put multiple blasters to work to achieve your deadline.

Typical Applications:
Our ride on multi-floor stripper allows us to provide a unique floor stripping service. Weighing up to 750kg, with weights are attached, this machine will quickly clear large areas often up to 10 times quicker than conventional walk-behind machines. This can be vital when refurbishing retail floors outside of trading hours.

Typical Applications:
Un-level floors can cause big problems, whether it’s a new floor poured to the wrong height or just an old floor too uneven to receive a new floor covering.

Our industrial floor planers can fix these problems by cutting down the high areas to within your tolerated levels. After initial consultation we will work to the level you require using laser levels to measure our progress, leaving site engineers focus on the bigger issues.

Typical Applications:
Concrete planers can also be used to remove old/heavy coatings and profile the floor prior to new flooring systems.

Typical Applications:
Using varying diamond tools and grit sizes a range of floor finishes can be achieved. Diamond grinding can also be used to remove old coatings and to reduce floor levels. Diamond grinding leaves a smooth and flat surface with fine circular score marks, which are a perfect anchor or key for a thin coating, to guarantee a long life without de-bonding.

Typical Applications:
This is an open method of blasting which is generally used on vertical areas, iron gates and railings, plant machinery or stonework. This aggressive cleaning can remove rust or strip old plaster off historical buildings. By using different medias, it can be used for different results. Traditionally, this was known as sand blasting. Today, several other media options are used, such as crushed glass, copper slag, walnut shell, angular steel grit, garnet, etc.

Typical Applications:
Soda blasting is like grit blasting, however it is less aggressive. It is much less likely to damage the surface and so can be used to strip window frames whilst leaving the glass in situ. It is used a lot for the restoration of cars, as it does not heat or etch the metal. Soda is environmentally friendly and dissolves in water, which also helps with the clean up process.

Typical Applications:
  • Clean up of pavings.
  • Exterior cleanup of buildings.
  • Interior clean up in manufacturing areas, such as the food industry.
  • Graffiti Removal.
  • Light preparation for painting contractors.
  • Keying & Cleaning new concrete floors
  • Laitance removal
  • Removing rubber deposits
  • Commercial & retail centres
  • Multi-storey car parks
  • Steel platforms, ship decks or foot bridges
  • The removal of sheet vinyl, linoleum, cork, bonded carpet
  • Ceramic/Woodblock tiles
  • Old Sports surfaces
  • Failed latex and de-bonding membranes
  • Build up of excess materials in production areas
  • Un-even floor joints
  • Incorrect floor heights
  • Levelling floors in apartment buildings, commercial and retail developments
  • Un-even floor joints
  • Incorrect floor heights
  • Levelling floors in apartment buildings, commercial and retail developments
  • Accurate grinding of large concrete areas
  • Re-profiling of old concrete floors
  • Removal of old coating and contaminates
  • Grinding and finishing of resin based and tiled terrazzo
  • Provides ideal preparation for thin film coating
  • Exterior of stone buildings.
  • Removal of coatings from metal architecture.
  • Removal of rust from metal architecture.
  • Cleaning / polishing of aluminium, copper and other metals.
  • Cleaning masonry or soft stone, protected statues or historical monuments.
  • Clean delicate surfaces after fire or smoke damage.
  • Stripping off coatings from timber.
  • Removal of antifouling from boats.
  • The restoration of cars.
  • Removal of carbon buildup.
  • Graffiti Removal.
Polished Concrete | Shot Blasting | Floor Grinding | Floor Stripping | Surface preparation | Diamond grinding tools |
First Name:
Newsletter Signup
Making sure we're meeting your needs......